Binance download

List of the table of contents of this article:

• 1,Binance download What can be said about the armrest box of the car?
• 2, 3, How to disassemble the central armrest box of the land patrol

What can be said about the armrest box of the car?

1. Box lid: The uppermost part of the armrest box is called the lid. If you want to connect the lid to the box, you can open the lid and put drinks, mobile phones and other small items in the box.

2. The middle part of the armrest box is called the box, which is mainly composed of the inner plate and the outer layer.The inner panel provides good pressure resistance for the armrest box. The outer layer is mostly leather, which is soft in texture, beautiful in appearance, and feels more comfortable. Base: The bottom of the armrest box is called the base. According to different installation methods, the base can be divided into fixed and inverted.

3. The box is mainly composed of inner plate and outer coating. The inner panel provides good pressure resistance for the armrest box. The outer coating is mostly genuine leather, which is soft in texture, beautiful in appearance, and more comfortable. Foundation: The bottom part of the armrest box is called the base. According to the installation method, the base can be divided into two types: card type and inverted type.

What are the components of the car armrest box

1. The lid: The uppermost part of the armrest box is called the lid. If the lid is connected to the box, open the lid, you can put drinks, mobile phones and other small items in the box.

2. Box cover: The top of the armrest box is called the box lid. The lid of the box wants to be connected with the body of the box. Open the lid of the box, and you can put drinks, mobile phones and other small items in the box. Box: The middle part of the armrest box is called the box. The box is mainly composed of inner plate and outer coating.

3. The car armrest box is an auto part installed between the two seats, which belongs to the car interior system. The components of the car armrest box include the lid, the box body and the base. The car armrest box is a kind of auto parts installed between the two seats, which belongs to the car interior system.

4. The box is mainly composed of the inner plate and the outer layer. The inner panel provides good pressure resistance for the armrest box. The outer layer is mostly leather, which is soft in texture, beautiful in appearance and more comfortable. Armrest box parts: The bottom of the base armrest box is called the base. According to the installation method, it can be divided into two types: card type and inverted type.

5. Small items such as mobile phones. The part in the middle of the box armrest box is called the box. The box is mainly composed of the internal plate and the outer_clad layer. The internal plate provides good pressure resistance for the armrest box. The outer layer is mostly leather, which is soft in texture and beautiful in appearance, and feels more comfortable. The bottom part of the base armrest box is called the base, which is not easy to fall off.

How to disassemble the central armrest box of the land patrol

1. Steps to remove the handrail knob of the Land Rover: Open the central armrest box and open the cotton cover inside. Hang the gear to the N gear, and then hold the gear handle and lift it up hard to break free from the fixed buckle of the gear lever. Use a plastic opener to pry the junction of the storage box panel and the armrest box, and pry the left side first.

2. Steps to remove the middle armrest box of Cooluz: First, there are two bolts at the handle, and the bolts need to be unstrewed. Secondly, there are only two screws, and the screws also need to be removed. After removing the screws, they are all stuck, and they will come down after warping. Finally, it is the method of removing the Kuluze armrest box to complete the operation.

3. The method of removing the Land Rover armrest knob is as follows: open the central armrest box and uncover the cotton cover inside.Use the 10# tool to remove the two 10# screws and put the fixing screws. Hang the gear to the N gear, and then hold the gear handle knob and lift it up hard to break free from the fixed buckle of the gear lever.

4. The first step: Open the armrest box and remove the internal screws. A 10# screwdriver is required here. Step 2: Pull the handbrake to the highest height and pry open the plastic cover on one side of the handbrake. Step 3: Remove the cover of the cigarette lighter.

5. Open the armrest box and remove the internal screws. No. 10 screwdriver is needed here. Pull up the handbrake and pry open the plastic cover on one side of the handbrake. Remove the cover of the cigarette lighter.